London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

36 views

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

22 views

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

80 views | 1 faves

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

136 views | 1 faves

33.6 pounds

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

139 views | 1 comments | 2 faves

none
none

140mm front, 6.5 rear, need to get a cane creek angleset headset, currently at 70.5 degrees, want it at 69, chain stays 415mm, wheelbase is 1060mm, bb height is 14.5"

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

52 views

none
none

pretty close with an 8" shock

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

118 views | 2 comments

none
none

pretty close with an 8" shock

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

44 views

none
none

home made bike frame made from an azonic steelhead and norco vps, about to figure out geo and measurements, not bad for a 15 year old! tell me what you think

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

87 views | 2 comments | 2 faves

none
none

home made bike frame made from an azonic steelhead and norco vps, about to figure out geo and measurements, not bad for a 15 year old! tell me what you think

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

258 views | 17 comments | 4 faves

none
none

home made bike frame made from an azonic steelhead and norco vps, 69.5 degree head tube angle, 415mm chainstays, 11.5 inch seat tube length, 22 inch top tube, +20mm bb rise, not bad for a 15 year old! tell me what you think

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

53 views

none
none

home made bike frame made from an azonic steelhead and norco vps, about to figure out geo and measurements, not bad for a 15 year old! tell me what you think

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

26 views

none
none

home made bike frame made from an azonic steelhead and norco vps, about to figure out geo and measurements, not bad for a 15 year old! tell me what you think

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

64 views | 4 comments

none
none

home made bike frame made from an azonic steelhead and norco vps, about to figure out geo and measurements, not bad for a 15 year old! tell me what you think

London, Ontario

willie-box: home-made
in: Bikes - Dirt/Street/Park

116 views | 2 comments

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

69 views

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

76 views

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

183 views | 10 comments | 2 faves

none
none

BB rise +10mm Wheelbase 1070mm chainstay 410mm actual top tube 20.75" fork travel 120mm shock size 6.5x1.5 headtube angle 70.5 degrees

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

83 views

none
none

quick put together, took and old hacked up khs frame, and took some parts off my old norco dh bike, and made this up. i have an azonic frame that will be the good copy, just used this frame to figure out hole drilling spots and the way ill set up the suspension. chain stays are 420mm, bb rise should be about 0 (level with axles) with 100mm front travel. top tube of azonic is 21"

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

89 views | 2 comments

none
none

quick put together, took and old hacked up khs frame, and took some parts off my old norco dh bike, and made this up. i have an azonic frame that will be the good copy, just used this frame to figure out hole drilling spots and the way ill set up the suspension. chain stays are 420mm, bb rise should be about 0 (level with axles) with 100mm front travel. top tube of azonic is 21"

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

42 views

none
none

quick put together, took and old hacked up khs frame, and took some parts off my old norco dh bike, and made this up. i have an azonic frame that will be the good copy, just used this frame to figure out hole drilling spots and the way ill set up the suspension. chain stays are 420mm, bb rise should be about 0 (level with axles) with 100mm front travel. top tube of azonic is 21"

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

51 views

none
none

quick put together, took and old hacked up khs frame, and took some parts off my old norco dh bike, and made this up. i have an azonic frame that will be the good copy, just used this frame to figure out hole drilling spots and the way ill set up the suspension. chain stays are 420mm, bb rise should be about 0 (level with axles) with 100mm front travel. top tube of azonic is 21"

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

57 views

none
none

quick put together, took and old hacked up khs frame, and took some parts off my old norco dh bike, and made this up. i have an azonic frame that will be the good copy, just used this frame to figure out hole drilling spots and the way ill set up the suspension. chain stays are 420mm, bb rise should be about 0 (level with axles) with 100mm front travel. top tube of azonic is 21"

London, Ontario

willie-box: home-made
in: Bikes - Freeride/DH

26 views

none
none

quick put together, took and old hacked up khs frame, and took some parts off my old norco dh bike, and made this up. i have an azonic frame that will be the good copy, just used this frame to figure out hole drilling spots and the way ill set up the suspension. chain stays are 420mm, bb rise should be about 0 (level with axles) with 100mm front travel. top tube of azonic is 21"